ACURA RSX

[Guest Close BogdanRR]

4inline 2.0 i-VTEC 201cp

Coupe-ul de lux de la Acura, acelasi model cu Honda Integra.
Un model intens aclamat pentru calitatile dinamice indiscutabile, dar care se apropie vertiginos de sfarsit de cariera.
Merita un inlocuitor? Pareri.

[hondatu Administrator Find all posts View Profile Close hondatu]

Conform traditiei ar merita un succesor pe masura mai ales pentru brandul Acura care daca nu va duce lipsa de un coupe.
Eu insa zic ca nu va mai avea un urmas............. :roll: ops: :roll:

[Guest Close BogdanRR]

Se pare ca ai dreptate:

Although it has been a strong seller for Honda, the RSX does not fit within the confines of Acura's re-structured market strategy, formulated after the decision to take the Acura brand worldwide (previously, the Acura nameplate has appeared only in North America, elsewhere in the world the same models are sold as Hondas). With the introduction of the similarly powerful and less expensive 2006 model-year Honda Civic Si to the marketplace, the decision has been made to discontinue production of the RSX, with the final units slated to be built in summer 2006. Because of its lower pricing and longer list of available options, Honda considers the new Si to be a more viable choice for performance minded young men, who are the most common buyers of RSXs. Speculatory articles seem to indicate that a 2-door variant of this new TSX will replace the RSX as Acura's entry-level sports coupe, although it will be more luxurious, more expensive and more powerful than the RSX and will thus likely appeal to a different market segment. In Canada, the RSX was replaced by the related Acura CSX, which also replaced the EL.

Recently, Dick Collier, VP of PR at Honda Motor Co., Ltd. has come out to say that there will be no 2007 RSX.

Deci, in cateva cuvinte, noul Si e suficient in a-l inlocui pe RSX in inimile cumparatorilor, iar viitorul coupe Acura va fi derivat din noul TSX, deci dintr-o clasa superioara.
O decizie sanatoasa din punct de vedere comercial, dar fanii vor plange dupa perfromantele exceptionale ale Integrei/RSX.

[cryo Moderator Find all posts View Profile Close cryo]

Mi se pare mie, sau modelele sportive ale Honda isi pierd din ce in ce mai mult ponderea? Prelude, CRX, Integra/RSX, S2000, NSX, din ce in ce mai putine modele Type-R, Accord Euro-R disponibil doar in JDM/Australia, etc... Din cate vad, cam totul a ramas pe umerii CTR / CSi, doar cu promisiuni pentru un viitor luminos, dar indepartat....

[hondatu Administrator Find all posts View Profile Close hondatu]

Nu ti se pare, chiar ai dreptate! Honda a fost luata de val cu noile curente din ultimii ani, SUV, vanuri and co., coupe-urile au picat, iar restul sportivelor sunt pe cel mai sigur drum al mormantarii.
Vremuri noi, cerinte noi, filozofie noua, pretentii mari, tehnica multa....................

[tokyodream Senior Member Find all posts View Profile Close tokyodream]

http://www.importtuner.com/tech/powe...e_s/index.html

[tokyodream Senior Member Find all posts View Profile Close tokyodream]

De la noi:

http://www.softpedia.com/get/Desktop...nsaver-1.shtml

[tokyodream Senior Member Find all posts View Profile Close tokyodream]

Forumuri:

http://forums.clubrsx.com/

http://www.rsxzone.com/

[tokyodream Senior Member Find all posts View Profile Close tokyodream]

multumesc

2005 Acura RSX Type-S - Power Pages


By Brandon Burrell


• Owner: Frankie Alliano
• Dynamometer Model: dyno dynamics 450 single axle chassis dynamometer
• Installation: mb racing (kevin maecha)
• K-pro Tuning: xenocron tuning

2005 Acura Rsx Type-S:

Pros:

The '05 RSX continued building on Honda's reputation for affordable performance and high modification potential. Powering the Type-S is Honda's K20Z1, producing 210 hp and 140 lb-ft of torque-making it (at the time) one of the highest specific outputs of any naturally aspirated production engine in the world. Combined with a diminutive curb weight of 2,775 lbs, power gains measured by the dyno easily translate to real-world performance.

Cons:

Production of the Type-S with the K20Z1 only occurred in the '05 and '06 model years, making it a bit tricky to find upgrade options. While many aftermarket companies offer components specifically designed for this vehicle, many fail to recognize the subtle differences between the various trim levels, often neglecting to make the necessary alterations to insure proper fitment.

Notes:

If the following dyno numbers appear lower than expected, please note all testing was performed utilizing a true heartbreaker: the Dyno Dynamics 450, reputed to be one of the most accurate and incorruptible chassis dynamometers in existence, albeit one that corrects for more drivetrain loss than most. Also, in order to insure the aftermarket parts tested here were not restricted by OEM components, our subject vehicle had been fitted with a K&N Typhoon intake and Skunk2 Megaflow cat-back exhaust prior to testing.

Pros:

The legendary K-Pro EMS is unique amongst engine management systems (EMS) because although technically a stand-alone, it collaborates with the factory ECU, ensuring near-flawless operation with no loss in daily drivability. Interfacing with the K-Pro requires the use of Hondata's KManager software and a standard USB cable, both of which are provided with the unit. The KManager software seamlessly integrates both a complete engine management suite with an onboard data logger. This makes finding problem cells and altering maps nearly painless. Equally impressive is the speed at which you can upload these calibrations to the K-Pro, making fine-tuning your whip on the street, or a quick map switch at the track, almost effortless.

Cons:

Having such a competent piece of hardware doesn't come cheap. In order to install the K-Pro into any '05-'06 RSX, one must provide or purchase a '02-'04 RSX ECU, since the newer unit is incompatible with the device. The primary wideband O2 senor must also be swapped with one for the '02-'04 model years-an important step, as the stock O2 is unable to properly interface with K-Pro, leading to inaccurate air/fuel readings.

Parts:

Compatible ECU, K-Pro EMS, adapter harness, software CD, USB sable, stickers

Tools:

Flathead screwdriver, 10mm sockets, ratchet, extension, Windows-enabled laptop

Installation Time:

30 minutes

Notes:

Installation and operation were surprisingly straightforward. The OEM ECU is located under the glove box and is easily accessible. However, if one wishes to fully conceal the K-Pro, the stock unit must be completely removed. If this is done, remember to plug in the USB cable prior to mounting and run the cable though the glove box to allow easy accessibility. Also note the K-Pro only comes with a 30-day warranty when purchased through an authorized Hondata dealer, so be prepared to complete the install the day you receive it to make sure it is properly functioning. We should also note that each product we installed on the RSX was tuned with the K-Pro to achieve maximum horsepower.

Hondata K-Pro Engine Management System:

Horsepower Gain:

• 2,000 to 3,500 rpm range: 8.0 to 10.0
• 3,500 to 5,500 rpm range: 3.0 to 6.0
• 5,500 to redline rpm range: 10.0 to 15.0

Torque Gain:

• 2,000 to 3,500 rpm range: 10.0 to 15.0
• 3,500 to 5,500 rpm range: 5.0 to 10.0
• 5,500 to redline rpm range: 6.0 to 15.0

Strup Race Header:

Horsepower Gain
• 2,000 to 3,500 rpm range: 2.0 to 3.0
• 3,500 to 5,500 rpm range: 3.0 to 12.0
• 5,500 to redline rpm range: 10 to 20

Torque Gain:

• 2,500 to 3,500 rpm range: 1.0 to 4.0
• 3,500 to 5,500 rpm range: 4.0 to 15.0
• 5,500 to redline rpm range: 5.0 to 16.0

Pros:

The Strup Acura RSX Type-S Race Header features a 4-2-1 design to increase flow and maximize power. Improvements to both power and torque were evident throughout the entire power band, with particularly great gains up top. The header is constructed of 304 mandrel-bent stainless steel tubing and is robotically TIG welded, resulting in a durable, high-quality product that should last for years.

Cons:
Using the stock motor mounts, we experienced some knocking of the header against the frame. To eliminate this, Strup recommends replacing the OE mounts with stiffer Energy Suspension Motor Mount Inserts. The need to purchase new mounts does increase the overall cost of installation, but these should be added, regardless.

Parts:

Two mufflers with piping, gaskets, hardware, decals

Tools:

6-, 8- and 10mm socket, 10-, 12-, 14- and 17mm open-end wrench, ratchet, extension and swivel socket, hanger tool, WD-40

Installation Time:

60 minutes

2005 Acura RSX Type-S - Power Pages:



Notes:

Worth acknowledging is that gains in the higher rpm range were made without sacrificing low-end power-an exceptional feat for this application. Using the K-Manager software and the factory wideband, we could quickly see the A/F ratio had become lean in the areas where the most power was being made. We increased fueling in these areas to prevent knock and high engine temps, which, if not corrected, could eventually cause damage to the combustion chambers.

Pros:

The Brian Crower (BC) cams produced some desperately needed low-end torque and respectable horsepower gains up top, nicely complementing the previous mods. Even though we needed to engage VTEC a bit later than with the stockers, our RSX still pulled nicely from 4,000 onward. Overall, these cams performed great and didn't produce any drivability issues common when switching to a more aggressive cam.

Cons:

The installation of camshafts can be difficult and time consuming, requiring an advanced understanding of the K-series engine. Although the cams themselves are competitively priced, they require the use of BC's Valve Spring and Retainer kit (part# BC0040) when upgrading from a stock motor.

Parts:


Camshafts, titanium retainers, BC dual valve springs

Tools:

10-, 12- and 14mm socket, 10- and 12mm open-end wrench, ratchet, extension, valve lash tool, valve adjustment tool, white marking paint for cams, zip ties, Hondabond

Install Time:

5 hours

Notes:

If you are going to attempt this cam install yourself, set aside a major block of time, as just the act of getting the timing chain positioned and threaded correctly can take upwards of 60 minutes. Kevin Maecha of MB Racing has this tip: "Before removing the stock cams, use zip ties or rubber bands to keep the rocker assembly together. This will make it easier to position them correctly once the new cam is in position." In addition to the wrenching, engine management is a crucial next step to ensure proper functioning and maximum power. The more aggressive profile of the BC cams required altering many parameters of our calibration-most critical are those controlling VTEC and cam angles.

Brian Crower:

Stage 2 N/A Cams With Valve Springs & Retainer Kit:

Horsepower Gain
• 2,000 to 3,500 rpm range: 3.0 to 5.0
• 3,500 to 5,500 rpm range: 5.0 to 9.0
• 5,500 to redline rpm range: -3.0 to 10.0

Torque Gain
• 2,500 to 3,500 rpm range: 3.0 to 6.0
• 3,500 to 5,500 rpm range: 6.0 to 0.0
• 5,500 to redline rpm range: -3.0 to 5.0

CONCLUSIONHP Level+HPTQ Level+TQBASELINE 167.1119.1
HONDATA K-PRO 177.310.2127.07.9
STRUP RACE HEADER 191.714.4135.58.5
BRIAN CROWER ST2 CAMS 201.710.0137.31.8
FINAL201.734.6137.318.2

Conclusion:

As we've shown, the '05 RSX Type-S responded well to our modifications, achieving peak gains of approximately 35 whp and 18 lb-ft of torque. These numbers may not seem huge to some, but take a closer look at the dynos and what you'll find is that increases in power are consistent throughout the entire power band. However, most important is how the car feels on the streets, and once VTEC engages, it's astonishing how hard this little RSX pulls.

BANKROLLHONDATA K-PRO (W/ '02-'04 ECU) $1,595.00
STRUP RACE HEADER $600.00
BRIAN CROWER STAGE 2 N/A CAMS $595.00
BRIAN CROWER SPRINGS & RETAINER KIT $495.00
MSRP Total $3,285.00

http://www.importtuner.com/tech/powe...end_power.html

[tokyodream Senior Member Find all posts View Profile Close tokyodream]

Neal's Fantasy Factory Reimagines the Acura RSX

http://vtec.net/news/news-item?news_item_id=1045727

For those of you who asked for a hatchback version of the TOV NFF CLX Coupe, Neal has cooked up a little something for you.

[hondatu Administrator Find all posts View Profile Close hondatu]

N-apoi sa si-o tina la ei in SUA daca va fi sa fie adevarata!!!

[dragostan Senior Member Find all posts View Profile Close dragostan]

Astia au inceput cu un scirocco si l-au luat putin la pila.

[Shyne Junior Member Find all posts View Profile Close Shyne]

Salut! Sa incep cu inceputul. Acum aproximativ 2 ani m-am indragostit de un type R (ep3) pe care l-am vazut de la geamul unui hotel din Finlanda (sunt navigator, urma sa ma ambarc a doua zi si fumam o tigara pe geam cu toate ca era iarna, in camera era fumatul interzis), din acel moment mi-am dorit o honda. Dupa lungi cautari printre japoneze (subaru, mazda, toyota, honda etc), pe care eram deja setat de prin 2009 cand am stat 1 luna in Japonia, am cumparat un Civic Type S Plus (fn1) care la momentul respectiv mi s-a parut cea mai buna alegere (pret/consum/aspect). Inca imi iubesc Type S'ul dar observand ca masinile honda "adevarate"(clasice) incep usor sa dispara, mi-am zis ca trebuie sa-mi cumpar o "masina proiect". Masina "proiect" pe care o vreau acum este Honda Integra Type R 2006, cum in europa nu avem decat cu volan pe dreapta, caut o Acura RSX Type S 2005-2006 (chiar daca e mai slabuta la motor, sist de franare etc). Am crezut ca imi va fi usor sa gasesc una de vanzare pe mobile, autoscout dar se pare ca m-am inselat. Aici apelez la voi, daca ma puteti ajuta cu siteuri unde pot gasi acest model de vanzare si orice informatie despre Acura RSX Type S '05-'06 (probleme, piese schimb in europa, daca stiti pe cineva care are aceasta masina, daca merita, orice). Multumesc!
PS: nu ma grabesc, momentan sunt in voiaj. Dupa 9 ianuarie incepe adevarata cautare a masinii proiect.

[ticker Administrator Find all posts View Profile Close ticker]

In Ungaria vazusem de vanzare.

gen http://m.hasznaltauto.hu/auto/acura/...type-s-8373195

sau

http://m.hasznaltauto.hu/auto/acura/...ra_rsx-8381365

[Shyne Junior Member Find all posts View Profile Close Shyne]

Multumesc pentru link'uri, Ticker! Inca nu am gasit una din 2005/2006 dar mai caut.